Superplasma PL Helmet Yellow
EN12492.Ventilate.51-62cm.420g


Download original file
AHE00005-202_Kask_SUPERPLA.jpg
Lightweight, well-ventilated safety helmet with four point chinstrap (weight only 420g). A comfortable, ergonomic model with excellent fit and easily attachable accessories. Can be adjusted with just one hand.  
 
Designed for versatile use in the field of industry, construction, rescue and other environments with a risk of falling. Suitable for narrow places, asphalt work, removing snow from the rooftops and other high-intensity work where it's likely to get hot.  
 
Ten air intakes in the front, sides and back provide cooling and maximum ventilation. The air intakes are equipped with an alumnic AirGrid anti-intrusion grille, that prevents entry of debris whilst maintaining breathability. Increased natural air flow due to the vents in the inner shell’s summit area provide efficient ventilation and air recycling. The comb structure inside the helmet offers far better shock absorption than a traditional string structure. The inner shell has an extended contact surface with the head particularly the in front and rear parts which provide superior fit and better comfort. Easy to attach various eye and face protection. Integrated and exceptionally easy to use attachments for attaching a headlamp with a headband. A holder in the front of the helmet to keep the headlamp at its right place. Ear muff adapters attachable on the sides.  
 
Strap system is crossed-back for greater stability, comfort and ease of use even in the most difficult working positions. The advanded Up-N-Down adjustment system provides the most precise and comfortable fit. A central ratchet wheel in the back and two lateral finger-push winglets allow rapid and exact adjustment of the size, range 51-62cm. Precise adjustment also in terms of height and inclination allow correct positioning and ultimate fit of the helmet. The helmet does not have a peak which hinders work, restricts sight and strains necks nor a wide egde which might cling to structures. Chin strap includes special Ring To Hook loop which allows the helmet to be connected to the harness or workwear when not in use. Cushions are made of high-tech 2DRY material for maximum comfort and fresness. The material transfers moisture efficiently and dries very quickly.  
 
Kask helmets are easily compatible with various other protective equipment. Recommended choices e.g. GVS Elipse half mask respirators and Bollé Safety eye protection.  
 
Meets these EN12492 mandatory requirements:  
5.7.3 Chin strap requires great force to open, preventing the helmet falling off after an impact on the head. (stays closed with a 50kg pull)  
4.1.4 Efficient ventilation (adequate total combined surface area of air intakes)  
4.2.1.1 Shock absorpion to objects falling from the height of over 1m. (5kg from 2m height)  
4.2.1.2 Impacts to the front (5 kg from the distance of 0,5 m)  
4.2.1.3 Impacts to the sides (5 kg from the distance of 0,5 m)  
4.2.1.4 Impacts to the back (5 kg from the distance of 0,5 m)  
4.2.2 Multiple objects intruding the helmet (2x 3 kg sharp object, 1m height)  
4.2.3 Durability of the size adjustment system  
4.2.4 Tilting test (10 kg falling object tears the helmet upwards from the helm at the front and the back)  
 
Maximum life time 10 years. External shell: PP Polypropylene. Internal shell: HD Polystyrene. Weight: 420g. 3 years guarantee against defects in materials and workmanship. Standard EN 12492. Made in Italy.  
 
Additional accessories:  
Plasma V2 Plus Visor clear - eye protection with thumbscrew (WVI00018-500)  
Plasma V2 Plus Visor smoke - eye protection with thumbscrew (WVI00018-510)  
Plasma V2 Plus Visor mirror - eye protection with thumbscrew (WVI00018-520)  
Plasma Full Face Visor clear - full face shield with thumbscrew (WVI00003-500)  
Plasma Full Face Visor smoke - full face shield with thumbscrew (WVI00003-510)  
Plasma Full Face Visor mirror - full face shield with thumbscrew (WVI00003-520)  
Plasma Mesh Visor - full face shield without attachments (WVI00006-)  
Plasma Mesh Visor Carrier - upper frame for attacting full face shield (WVI00005-)  
Plasma Visor Carrier Attachment 30mm - attachement pair for visor (WAC00008-)  
Bollé Safety B-Clean Cleaning Station for visor (B410)  
Bollé Safety Anti-Fog Kit for visor (B200)  
Helmet Bag Transport Pouch (WAC00026-)  
Plasma Neck Protector Grey (WAC00020-)  
Plasma Neck Protector HI VIZ orange (WAC00024-)  
Plasma reflective tape silver - for maximising visibility (WAC00001-003)  
Transparent stickers to help identity helmet (WAC00018-)  
Superplasma PL cushioning (WPA00003-)  
 
Plasma Ear Muffs Bayonet Adapters (WAC00003-)  
SC1 Ear Muffs green (WHP00004-)  
SC2 Ear Muffs yellow (WHP00005-)  
SC3 Ear Muffs orange (WHP00006-)  
Sordin left/RIGHT FM Pro - Ear Muffs with radio, adapter 01 (10108382-S)  
Sordin left/RIGHT Cut Off Pro - Level Dependent Ear Muffs, adapter 01 (10111790-S)  
Sordin left/RIGHT Dual Pro - Level Dependent Ear Muffs with radio, adapter 01 (10108386-S)  
 
Lupine Penta - headlamp with integrated battery (i0750)  
Lupine Neo X2SC 900lm - headlamp (i0850-002)  
Lupine Piko X4 SC 1900lm - headlamp (i4150-202)  
Lupine Blika X4SC 2100lm - headlamp (i0150-102)  
Lupine FrontClick Helmet Mount Set - for attaching a headlamp (i1082)  
Lupine FastClick Duallock, helmet mounted battery holder (i920)  
Kask Winter Cap Underhelmet (WPA00007-)  
BUFF Professional Underhelmet - thin underhelmet headwear (S-M: 120234.999.20.00. L-XL: 120234.999.30.00)  
BUFF Professional CrossTech Balaclava - underhelmet headwear for windy conditions (S-M: 124206.999.20.00, L-XL: 124206.999.30.00)  
BUFF Professional Merino Wool Balaclava -merino wool underhelmet headwear (111627.999.10.00)  
 
Government decree (205/2009) on construction work safety, chapter 13, 71§: "One must always use safety helmet on a construction site. If needed the helmet must be equipped with underhelmet liner. At construction work, one must use personal eye protection required by the particular work and work circumstances. Employer must equip workers with protective eyewear in tasks with significant danger of eye injury.  
 
Kask safety helmets can be orded with your company logo factory-printed with your choice of color.  
Minimum quantities:  
Standard color with a logo sticker: 24 pcs  
Standard color with a printed logo: 100 pcs  
Own color: 500 pcs 
Pictures
Files
Kask_Superplasma_PL_Technical_Details_EN.pdf


Brand Kask
Product Reference AHE00005-202
Future Recommended Retail Price VAT24% 110.95
GTIN/EAN 8057099028776
Product Group Helmets - Helmets, Work - EN12492 Work at Height
Brutto Weight(kg) 0.59
Net Weight(kg) 0.42
Wholesale pack qty 28
Masterpack qty 112
Pallet Qty 112
Electrical number 6355529
CN-Tariff Code 65061010
Warranty (Months) 36
UNSPSC 46181701
Country of Origin IT
Replacing Product WHE00108-202.UNI
Replaced product A010CA01
Classification Work
Vandernet.com visibility No
Sales pack height (mm) 400
Sales pack width (mm) 300
Sales pack depth (mm) 250
Wholesale pack height (mm) 820
Wholesale pack width (mm) 540
Wholesale pack depth (mm) 470


Open as new window